[Linux] Redhat 3.4 for QLA2460 HBA Card install

Redhat 3.4 for QLA2460 HBA Card install

 

QLOGIC QLA2460 HBA PCI-X 4GB Card

 

TEST 환경

- O/S : Redhat ENT 3.4 (2.4.21-27.ELsmp)

- H/W : Intel SR2300 (Xeon 3.0GHz)

 

1. 서버 Shutdown

 

2. HBA Card 설치 (PCI-X 슬롯에 삽입)

 

3. 서버 기동 (기동 중 시스템 BIOS 상에서 HBA 카드 인식 여부 필히 확인)

 

4. 드라이버 다운 로드 (qlogic 홈페이지 또는 설치용 CD 이용)

 - qlafc-linux-7.07.06-5-install.tgz

 

5. 드라이버 패키지 압축 해제 및 드라이버 설치

# tar xvfz qlafc-linux-7.07.06-5-install.tgz # cd qlafc-linux-7.07.06-5-install # ./qlinstall

 

6. 설치 내용 확인

Creating initial /usr/src/qlogic/v7.07.06-5/install.v7.07.06-5.log... Please wait: Preparing qla2x00 modular driver build \ Creating backup of old driver in /usr/src/qlogic/v7.07.06-5/backup.... Installing driver in /lib/modules/2.4.21-27.ELsmp/kernel/drivers/scsi.... Building module dependency.... depmod... Setting up QLogic HBA API library... Please make sure the /usr/lib/libqlsdm.so file is not in use. Installing ia32 api binary. Library 3.00 build10 already installed at /usr/lib/libqlsdm.so. Done. Unloading any loaded drivers Loading module qla2300 version: v7.07.06.... Loaded module qla2300 Building default persistent binding using SCLI Saved copy of /etc/modules.conf as /usr/src/qlogic/v7.07.06-5/backup/modules.conf-2.4.21-27.ELsmp-021313-113120.bak Building module dependency.... depmod... Saved copy of /boot/initrd-2.4.21-27.ELsmp.img as /usr/src/qlogic/v7.07.06-5/backup/initrd-2.4.21-27.ELsmp.img-021313-113120.bak Creating ramdisk mkinitrd... Ramdisk created. Reloading the QLogic FC HBA drivers.... Unloaded module qla2300 Loading module qla2300 version: v7.07.06.... Loaded module qla2300 Target Information on all HBAs: ============================== -------------------------------------------------------------------------------- HBA Instance 0: QLA2460 Port 1 WWPN 21-00-00-E0-8B-90-CC-83 PortID 00-00-00 -------------------------------------------------------------------------------- No fabric attached devices on HBA (Instance 0)! Installing the qlinstall-autoload script in /etc/init.d/ #*********************************************************# #               INSTALLATION SUCCESSFUL!!                 # #    SANsurfer Driver installation for Linux completed    # #*********************************************************#

 

6. SANsurferCLI 툴을 이용해 HBA 정보 확인

# /opt/QLogic_Corporation/SANsurferCLI/ # ./scli

 

 7. 이제 스토리지나 SAN 스위치를 연결하여 외장 DISK 연결을 확인해보자~~ 이부분은 다음에 ㅋㅋㅋ